Press Brake Accurl MB8-200T/4000mm With 6 axis

Description

ACCURL® EURO-GENIUS Series press brake features an CNC crowning system for improved quality, a servo driven back gauge system for increased speeds, and 3D capable graphical control unit to simulate bending sequences and collision points.Also has increased working speeds, stroke, daylight, and pressing capacities of GENIUS Series machines.
The future – as a result of rising energy costs and increasingly cost efficient speed-controlled drives offered on the market, variable-speed
solutions are on the advance.
Offline Programming
DA-Offline software maximizes machine efficiency and production output of press brakes. The Profile T software facilitates offline programming and simulation the bending process. Production preparation, make-ability and tooling verification, operator training, adding notes for production and many other functions can be carried out offline.
The Profile T software offers advanced programming in 2D/3D in line with the DA-Touch controller software. The steps from the start of programming to the desired program including its transfer to the control are clearly embedded in the user interface. Programming the product graphically shows a true scale representation of the intended product. Realistic product visualization gives feedback on feasibility, collisions, required tools and tool adapters for production.
Profile-T features:
2D or 3D versions
DXF converter (3D version only)
Full scale offline programming
Graphical product programming and bend sequence generation
Feasibility studies and production preparation
2D/3D automatic bend sequence calculation
Collision detection
Product sharing over Windows networking with press brake CNC
Machine setup preparation including print functionality
Production time calculation
Main Features:
1.Totally EU streamlined design,Monoblock by welding robots & aparatus and stress relief process by Annealing treatment.
2.All ACCURL machines are designed using SOLID WORKS 3D programming and made with enhanced ST44-1 quality steel with the latest technology.
3. MB8 Series are among the highest rated machines which will help you increase your productivity and keep costs at minimum levelwith its user friendly CNC controller and low cost hydraulic maintenance.
4. High quality and repetitive bending is obtained by using synchronized cylinders and valves.
5. Automatic axis referencing and calibrating when machine is turned on.
6. Rigid upper beam runs on 8-point bearings with bending precision of 0.01 mm
7. Well-known top and bottom tool brands are long lasting stiffened and provide precise bending.Silent high pressure pump.
Standard Equipment:
1. 4- axis Delem DA52s programming mode CNC control
2. Full synchronisation of Y1 + Y2 axes with proportional hydraulic valve system and constant monitoring by CNC system to +/- 0.01mm accuracy
3. High precision linear scales for measurement of stroke depth mounted on side frames rather than top beam to prevent any distortion in accuracy as beam comes under load
4. CNC-controlled X & R-axis as standard ballscrew backgauge with servo drive motors.
5. Light guards
6. Two micrometric backgauge finger-stops with lateral adjustment
7. Steel mono-block construction
8. Polished chrome plated and ground cylinders
9. Long  stroke and large open height dimensions
10. High approach and return speeds for production bending.
11. Euro style quick release top tool holders with intermediaries including wedges for crowning.
12. 88 degree sectionalised goose neck top tool
13. 4 way sectionalised multi vee bottom tool
14. Double footswitch control and pendant type control arm.
15. AKAS laser tooling guards
16. Electrically interlocked side guards
17. Electrically interlocked read access door
18. 2 sliding front support arms with linear guide rails for lateral adjustment and hand wheel for height adjustment, 1000mm long from centre of bottom tool vee.
19. Side guard is standard meeting CE regulations.
Delem DA52s CNC Press Brake Control system:
1. 6,4” VGA colour LCD (TFT)
2. Numerical, one page programming
3. Quick, one-page programming
4. Up to 4 axes (Y1, Y2, and 2 auxiliary axes)
5. CNC Crowning control
6. USB, peripheral interfacing
7. Tool/material/product library
8. Servo, frequency inverter and AC control for backgauge axes.
The best bending results
You can bend longer and deeper parts with standard SC/MB8-Bend Series.